LOOP CHAIR OWNER'S MANUAL
Care and Maintenance
The Loop Chair is rotationally molded of heavy-duty polyethylene, which allows it to thrive in a variety of environments and landscapes, including grass, patio, or pool ledge.
Cleaning
Simply wipe chair and side table down with a wet rag for everyday cleaning. For deeper cleaning, use a pressure washer or various household cleaners. If used in a pool with high calcium levels, you may use CLR Calcium cleaner to remove calcium lines that may occur. Rinse with water thoroughly after cleaning.
Using Loop Chair on Pool Ledge
The Loop Chair is built to withstand the elements and can be used on a ledge of a well maintained pool. Maximum depth recommended is 13". While we encourage you to leave the chairs on the ledge when not in use, there are two situations we recommend you remove them from the pool:
When highly concentrated chemicals are used (i.e. shock), we do recommend you remove the chairs / side table and only return them to the pool once chemical levels are back to normal.
In the event of a freeze, please remove chairs and side table and drain for the duration of freeze.
Installing Loop Chair on Pool Ledge
Locate and remove plugs at bottom of chair and side table with flat-head screwdriver. Do not discard.
Submerge chair in pool, allowing to fill with water through openings.
Once filled with water, replace plugs and position chair and side table as desired on ledge with a maximum depth of 13 inches.
WARNINGS
This chair should be used for the intended purpose of sitting. This furniture is not a toy. Do not stand on chair or table. Children should avoid playing on or around chairs. If the chair is wet, the surface will be slippery. Use caution. Keep safe distance from fire.